PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103690
103690 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For small digital cameras<br>- Sturdy outer shell made of EVA, for secure protection of the camera<br>- Flat inner compartment for storage media<br>- With removable neck strap and belt loop<br>- Guarantee: 10 years<br>- Usage: Photo<br>- Line: Hardcase<br>- Inside Dimension Width: 6.5 cm<br>- Inside Dimension Depth: 3 cm<br>- Inside Dimension Height: 10.5 cm<br>- Colour: Black<br>- Material: Ethylenvinylacetat (EVA)<br>- Weight: 65 g This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3690, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
103690
NSN: 5315-00-010-3690
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
colorGRAY/GREY
materialSTEEL OVERALL
thread_class2A A
thread_length0.500 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
first_end_styleCHAMFERED
thread_diameter2.562 INCHES NOMINAL IN
thread_quantity10.000 PER INCH
outside_diameter3.000 INCHES NOMINAL IN
special_features4500PSI
style_designatorTHREADED TYPE (EXTERNAL)
features_providedBLEEDER SCREW
NSN5315-00-010-3690
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103690 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
72798S7Interchangeable
interchangeable cross-reference
interchangeable
16333Interchangeable
interchangeable cross-reference
interchangeable
103690Interchangeable
interchangeable cross-reference
interchangeable
1578-1Interchangeable
interchangeable cross-reference
interchangeable
112006-2Interchangeable
interchangeable cross-reference
interchangeable
112006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103690?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103690?
103690 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Hama.
What parts can replace 103690?
There are 17 known substitutes for 103690: 72798S7, 16333, 103690 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103690?
103690 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103690

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026