12299-010: BELL CRANK.
The BELL CRANK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, connection_type: FLANGE ALL ENDS, special_features: MONEL HINGE PIN PLUG,FACE TO FACE 10.75,6 5/8 INCH FLANGE DIA.,15/16 FLANGE THICKNESS. IN, operating_pressure: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, valve_operation_method: AUTOMATIC, part_name_assigned_by_controlling_agency: 3 INCH SWING CHECK VALVE IN.
This part is cataloged in the U.S. Government catalog under NSN 3040-01-108-5343, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | COPPER ALLOY BODY |
| connection_type | FLANGE ALL ENDS |
| special_features | MONEL HINGE PIN PLUG,FACE TO FACE 10.75,6 5/8 INCH FLANGE DIA.,15/16 FLANGE THICKNESS. IN |
| operating_pressure | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| valve_operation_method | AUTOMATIC |
| part_name_assigned_by_controlling_agency | 3 INCH SWING CHECK VALVE IN |
| NSN | 3040-01-108-5343 |
| CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM FIRST END IN |
| CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM SECOND END IN |
| END HOLE/BALL DIAMETER | 0.328 INCHES NOMINAL SECOND END IN |
| END HOLE/BALL DIAMETER | 0.328 INCHES NOMINAL FIRST END IN |
| BORE LENGTH | 1.240 INCHES NOMINAL IN |
| STYLE DESIGNATOR | FLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS |
| END ITEM IDENTIFICATION | 2350010915405 CARRIER MLRS |
| BORE DIAMETER | 0.655 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| MATERIAL | STEEL |