PartsTable
Technical Data Sheet
Download PDF

1229010 — BELL CRANK

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

1229010: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: STEEL, bore_length: 1.240 INCHES NOMINAL IN, bore_diameter: 0.655 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, style_designator: FLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS, end_hole/ball_diameter: 0.328 INCHES NOMINAL FIRST END IN, end_item_identification: 2350010915405 CARRIER MLRS. This part is cataloged in the U.S.

Government catalog under NSN 3040-01-108-5343, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1229010
NSN: 3040-01-108-5343
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
bore_length1.240 INCHES NOMINAL IN
bore_diameter0.655 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
style_designatorFLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
end_hole/ball_diameter0.328 INCHES NOMINAL FIRST END IN
end_item_identification2350010915405 CARRIER MLRS
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM FIRST END IN
NSN3040-01-108-5343
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BELL CRANK TITLE COMPONENT PN 1229010 MFR BELL CRANK
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM FIRST END IN
•
END HOLE/BALL DIAMETER: 0.328 INCHES NOMINAL SECOND END IN
•
BORE LENGTH: 1.240 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
•
BORE DIAMETER: 0.655 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL2.576 INCHES MINIMUM AND 2.616 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER0.328 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER0.328 INCHES NOMINAL FIRST END IN
BORE LENGTH1.240 INCHES NOMINAL IN
STYLE DESIGNATORFLAT, RAISED FACE PIVOT HOLE, ONE OR MORE HOLES BOTH ARMS
END ITEM IDENTIFICATION2350010915405 CARRIER MLRS
BORE DIAMETER0.655 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
10085843Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation
Ready to buy 1229010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1229010?
1229010 is a BELL CRANK.
What parts can replace 1229010?
There is 1 known substitute for 1229010: 10085843. Substitute compatibility should be verified for your specific system.
What is the NSN for 1229010?
1229010 is cataloged in the U.S. Government catalog under NSN 3040-01-108-5343. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1229010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.