PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1206SS
1206SS ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 16.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6665, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1206SS
NSN: 3110-00-155-6665
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width16.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6665
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1206SS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508A FED SPEC SINGLE MATERIAL RESPONSE A
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508A FED SPEC SINGLE MATERIAL RESPONSE A
LOAD DIRECTIONRADIAL
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
601352Interchangeable
interchangeable cross-reference
interchangeable
ST10016Interchangeable
interchangeable cross-reference
interchangeable
77506Interchangeable
interchangeable cross-reference
interchangeable
T-105Interchangeable
interchangeable cross-reference
interchangeable
2001 XInterchangeable
interchangeable cross-reference
interchangeable
12374Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1206SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1206SS?
1206SS is a BEARING,BALL,ANNULAR.
What parts can replace 1206SS?
There are 27 known substitutes for 1206SS: 601352, ST10016, 77506 and 24 more. Substitute compatibility should be verified for your specific system.
Is 1206SS still available?
1206SS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1206SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026