ST10016: BEARING,BALL,ANNULAR.
The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 600 STEM, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.073 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, heat_treatment: T-62 SOLUTION HEAT TREATED SLEEVE, shank_diameter: 0.200 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 3110-00-144-8637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 600 STEM |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.073 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| heat_treatment | T-62 SOLUTION HEAT TREATED SLEEVE |
| shank_diameter | 0.200 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| fastener_length | 0.344 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| head_major_diameter | 0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN |
| specification/standard_data | 80205-NAS1739 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| material_document_and_classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| NSN | 3110-00-144-8637 |
| LUBRICATION MATERIAL | GREASE |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SURFACE FINISH | GROUND |
| SHIELD QUANTITY | 2 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 16.0 MILLIMETERS NOMINAL MM |
| OVERALL OUTSIDE DIAMETER | 62.0 MILLIMETERS NOMINAL MM |
| BORE SHAPE | STRAIGHT |
| LOAD DIRECTION | RADIAL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |