- For transmitting signals e.g. between an Internet router and a television. - Flexible materials guarantee optimum kink protection and prevent cable breakage.
- High-quality materials and separately shielded lines for excellent signal transmission. - Gold-plated plug with low contact resistance for secure signal transmission. - High-quality category 5e patch cable with 2 shielded RJ-45 plugs.
- Plug specification according to EIA/TIA 56813. - Gigabit (10/100/1000 Mbps) enabled. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-821-9164, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
12-2135
NSN:5330-00-821-9164 NIINs:008219164, 011709012, 012734719, 014151497, 015477534, 016602704 FSC:5330 — Packing and Gasket Materials CAGE:15434 — CUMMINS INC. (USA)
SPECIFICATIONS
material
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
hole_diameter
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.645 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
special_features
AASC AH-64 RIGHT ENGINE
aperture_diameter
1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
outside_corner_radius
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
end_item_identification
1520-015992203
cross-sectional_thickness
0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center
1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
material_document_and_classification
RULON MFR REF SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agency
GASKET,DRAIN PLUG
NSN
5330-00-821-9164
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
MATERIAL: PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS
0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER
1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
OVERALL WIDTH
2.645 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
APERTURE DIAMETER
1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIAL
PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL
HOLE DIAMETER
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12-2135?
12-2135 is a SEMICONDUCTOR DEVICES,UNITIZED manufactured by Hama.
What parts can replace 12-2135?
There is 1 known substitute for 12-2135: JHP108-155. Substitute compatibility should be verified for your specific system.
What is the NSN for 12-2135?
12-2135 is cataloged in the U.S. Government catalog under NSN 5330-00-821-9164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.