PartsTable
Technical Data Sheet
Download PDF

JHP108-155 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JHP108-155: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.645 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN, aperture_diameter: 1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN, outside_corner_radius: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, cross-sectional_thickness: 0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-821-9164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP108-155
NSN: 5330-00-821-9164
FSC: 5330 — Packing and Gasket Materials
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
materialPAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.645 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
aperture_diameter1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
outside_corner_radius0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
cross-sectional_thickness0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
material_document_and_classificationMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-821-9164
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JHP108-155 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
MATERIAL: PAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER1.145 INCHES MINIMUM AND 1.175 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.645 INCHES MINIMUM AND 2.675 INCHES MAXIMUM IN
APERTURE DIAMETER1.825 INCHES MINIMUM AND 1.855 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIALPAPER AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OVERALL
HOLE DIAMETER0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JHP108-155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP108-155?
JHP108-155 is a GASKET.
What is the NSN for JHP108-155?
JHP108-155 is cataloged in the U.S. Government catalog under NSN 5330-00-821-9164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP108-155

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.