PartsTable
Technical Data Sheet
Download PDF

11AB67 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

11AB67: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.6691 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN, overall_width: 0.4704 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-796-4613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11AB67
NSN: 3110-00-796-4613
NIINs: 007964613, 009910901
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54370 — ALFA LAVAL INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.6691 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM IN
overall_width0.4704 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
internal_fit-up_designationTIGHT
nondefinitive_spec/std_data111 TYPE AND 1 CLASS
NSN3110-00-796-4613
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11AB67 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
OVERALL WIDTH12.0000 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER40.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA3 TYPE
LOAD DIRECTIONRADIAL
SPECIAL FEATURESNOISE TESTED AND INSPECTED BY THE MFR
SUBSTITUTES & CROSS-REFERENCES 1
MILB17931-2TYPE111Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11AB67?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11AB67?
11AB67 is a BEARING,BALL,ANNULAR.
What parts can replace 11AB67?
There is 1 known substitute for 11AB67: MILB17931-2TYPE111. Substitute compatibility should be verified for your specific system.
What is the NSN for 11AB67?
11AB67 is cataloged in the U.S. Government catalog under NSN 3110-00-796-4613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11AB67