PartsTable
Technical Data Sheet
Download PDF

MILB17931-2TYPE111 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MILB17931-2TYPE111: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 12.0000 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-796-4613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILB17931-2TYPE111
NSN: 3110-00-796-4613
NIINs: 007964613, 007964614
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width12.0000 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
special_featuresNOISE TESTEDAND INSPECTED BY THE MFR
lubrication_materialLUBRICANT
overall_outside_diameter40.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data3 TYPE
retainer_fabrication_methodPRESSED
NSN3110-00-796-4613
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MILB17931-2TYPE111 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
OVERALL WIDTH12.0000 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER40.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA3 TYPE
LOAD DIRECTIONRADIAL
SPECIAL FEATURESNOISE TESTED AND INSPECTED BY THE MFR
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MILB17931-2TYPE111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILB17931-2TYPE111?
MILB17931-2TYPE111 is a BEARING,BALL,ANNULAR.
What is the NSN for MILB17931-2TYPE111?
MILB17931-2TYPE111 is cataloged in the U.S. Government catalog under NSN 3110-00-796-4613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILB17931-2TYPE111