PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 119114-1
119114-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CUSHION,SEAT BACK,AIRCRAFT is a the manufacturer industrial component. Key specifications include special_features: S5000 SEAT MODEL, end_item_identification: FUTURE LYNX, RECONNAISSANCE HELICOPTER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-107-4061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119114-1
NSN: 5340-00-107-4061
FSC: 5340
CAGE: 09652 — GENERAL MOTORS CORP BUICK MOTOR DIV (USA)
SPECIFICATIONS
special_featuresS5000 SEAT MODEL
end_item_identificationFUTURE LYNX, RECONNAISSANCE HELICOPTER
NSN5340-00-107-4061
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 119114-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.034 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
INSIDE DIAMETER LENGTH: 1.440 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
DESIGN TYPE: FRICTION
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER1.034 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH1.440 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
149929Interchangeable
interchangeable cross-reference
interchangeable
901409Interchangeable
interchangeable cross-reference
interchangeable
409MInterchangeable
interchangeable cross-reference
interchangeable
1409Interchangeable
interchangeable cross-reference
interchangeable
119114-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 119114-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119114-1?
119114-1 is a CUSHION,SEAT BACK,AIRCRAFT.
What parts can replace 119114-1?
There are 5 known substitutes for 119114-1: 149929, 901409, 409M and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 119114-1?
119114-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-107-4061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119114-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026