PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 901409
901409 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 29.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3286, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
901409
NSN: 3110-00-554-3286
FSC: 3110
CAGE: 23862 — MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width29.00 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
lubrication_materialLUBRICANT
overall_outside_diameter20.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-554-3286
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 901409 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: LUBRICANT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH29.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
MATERIALSTEEL RETAINER
OVERALL OUTSIDE DIAMETER20.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
1191141Interchangeable
interchangeable cross-reference
interchangeable
149929Interchangeable
interchangeable cross-reference
interchangeable
D34000578-001Interchangeable
interchangeable cross-reference
interchangeable
101070Interchangeable
interchangeable cross-reference
interchangeable
79NTE054Interchangeable
interchangeable cross-reference
interchangeable
592506Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 901409?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 901409?
901409 is a BEARING,BALL,ANNULAR.
What parts can replace 901409?
There are 23 known substitutes for 901409: 1191141, 149929, D34000578-001 and 20 more. Substitute compatibility should be verified for your specific system.
Is 901409 still available?
901409 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 901409

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026