PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1178-10-16
1178-10-16 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.137 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, thread_length: 1.000 INCHES MINIMUM IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3823, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1178-10-16
NSN: 5305-00-144-3823
FSC: 5305
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
head_styleROUND
head_height0.137 INCHES NOMINAL IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
thread_length1.000 INCHES MINIMUM IN
screw_materialSTEEL COMP 1010
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-144-3823
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1178-10-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
HEAD HEIGHT: 0.137 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
SCREW MATERIAL: STEEL COMP 1010
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
THREAD LENGTH1.000 INCHES MINIMUM IN
HEAD HEIGHT0.137 INCHES NOMINAL IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SCREW MATERIALSTEEL COMP 1010
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNF
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
B4525-303-6Interchangeable
interchangeable cross-reference
interchangeable
19090ADXInterchangeable
interchangeable cross-reference
interchangeable
23-01191-059Interchangeable
interchangeable cross-reference
interchangeable
AN520-10R16Interchangeable
Same NIIN cross-reference
interchangeable
FFS92ANDTYPE3ANDSTYLE1CInterchangeable
Same NIIN cross-reference
interchangeable
10130265Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1178-10-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1178-10-16?
1178-10-16 is a SCREW,MACHINE.
What parts can replace 1178-10-16?
There are 7 known substitutes for 1178-10-16: B4525-303-6, 19090ADX, 23-01191-059 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1178-10-16?
1178-10-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1178-10-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026