PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 117518
117518 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, corner_shape: SQUARE CENTER FLANGE OUTSIDE LEFT CORNER, flange_width: 0.1540 INCHES NOMINAL IN, hole_diameter: 0.1890 INCHES NOMINAL FIRST IN, overall_length: 0.5300 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES INTERMEDIATE LAYER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-393-5693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117518
NSN: 5315-00-393-5693
FSC: 5315
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
corner_shapeSQUARE CENTER FLANGE OUTSIDE LEFT CORNER
flange_width0.1540 INCHES NOMINAL IN
hole_diameter0.1890 INCHES NOMINAL FIRST IN
overall_length0.5300 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES INTERMEDIATE LAYER
style_designatorSOLID, EXTERNAL FLANGE, INTERNAL FLANGE ONE END
surface_treatmentPRIMER AND PAINT OVERALL
body_inside_diameter0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
body_outside_diameter1.1260 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM IN
end_to_flange_distance0.0620 INCHES NOMINAL IN
left_end_body_diameter1.1260 INCHES NOMINAL IN
NSN5315-00-393-5693
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 117518 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
454148-2Interchangeable
interchangeable cross-reference
interchangeable
7205BYInterchangeable
interchangeable cross-reference
interchangeable
205RInterchangeable
interchangeable cross-reference
interchangeable
PFFB171-005-01Interchangeable
interchangeable cross-reference
interchangeable
160606Interchangeable
interchangeable cross-reference
interchangeable
133Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 117518?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117518?
117518 is a BUSHING,SLEEVE.
What parts can replace 117518?
There are 27 known substitutes for 117518: 454148-2, 7205BY, 205R and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 117518?
117518 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-393-5693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117518

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026