PartsTable
Technical Data Sheet
PartsTable / MRO / 205R
205R ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL BODY, body_width: 0.250 INCHES NOMINAL IN, bore_shape: STRAIGHT, lens_color: RED, body_height: 0.250 INCHES NOMINAL IN, body_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 205R
NSN: 3110-00-156-5202
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL BODY
body_width0.250 INCHES NOMINAL IN
bore_shapeSTRAIGHT
lens_colorRED
body_height0.250 INCHES NOMINAL IN
body_length0.500 INCHES NOMINAL IN
bore_diameter25.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width2.750 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
load_directionANGULAR
NSN3110-00-156-5202
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 205R · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL OVERALL
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
7205BYInterchangeable
interchangeable cross-reference
interchangeable
205RInterchangeable
interchangeable cross-reference
interchangeable
PFFB171-005-01Interchangeable
interchangeable cross-reference
interchangeable
205Interchangeable
interchangeable cross-reference
interchangeable
2118869-7Interchangeable
interchangeable cross-reference
interchangeable
L600004507Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 205R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 205R?
205R is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 205R?
There are 8 known substitutes for 205R: 7205BY, 205R, PFFB171-005-01 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 205R?
205R is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 205R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026