PartsTable
Technical Data Sheet
11682 ✓ Verified by PartsTable
· NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

SPILL CLEAN-UP KIT,HAZARDOUS MAT. Key specifications include starter: NOT REQUIRED, current_type: AC, overall_width: 1.938 INCHES NOMINAL IN, terminal_type: WIRE LEAD, overall_height: 1.375 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-254-2479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11682
NSN: 5310-01-254-2479
FSC: 5310
CAGE: 62080 — WINDHAM LIFTS INC (USA)
SPECIFICATIONS
starterNOT REQUIRED
current_typeAC
overall_width1.938 INCHES NOMINAL IN
terminal_typeWIRE LEAD
overall_height1.375 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
voltage_rating120.0 VOLTS NOMINAL
bulb_designatorT-1
mounting_methodHOLE(S) LOCATION NOT OTHERWISE SPECIFIED
frequency_rating60.0 HERTZ NOMINAL
special_featuresCONSISTS OF 1 LARGE WATER RESISTANT DUFFLE BAG, 3 LARGE PILLOWS, 3 4-1/2"X 48" SOCKS W/O TIES, 2 EMPTY DISPOSAL BAGS, 2 5LB BAGS ABSORBENT LBS
terminal_quantity3
NSN5310-01-254-2479
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11682 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
50472Interchangeable
interchangeable cross-reference
interchangeable
12809Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
SCB70104Interchangeable
interchangeable cross-reference
interchangeable
S93717Interchangeable
interchangeable cross-reference
interchangeable
72188Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11682?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11682?
11682 is a SPILL CLEAN-UP KIT,HAZARDOUS MAT.
What parts can replace 11682?
There are 16 known substitutes for 11682: 50472, 12809, 00044 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11682?
11682 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-254-2479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11682