PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S93717
S93717 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 3.188 INCHES NOMINAL IN, first_hole_diameter: 0.250 INCHES NOMINAL IN, distance_from_centerline_of_hole_to_end_of_pin: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-067-9726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S93717
NSN: 5315-01-067-9726
FSC: 5315
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length3.188 INCHES NOMINAL IN
first_hole_diameter0.250 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.500 INCHES NOMINAL IN
NSN5315-01-067-9726
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S93717 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.500 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 3.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.250 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.500 INCHES NOMINAL IN
PIN OVERALL LENGTH3.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
72188Interchangeable
interchangeable cross-reference
interchangeable
A72188Interchangeable
interchangeable cross-reference
interchangeable
50472Interchangeable
interchangeable cross-reference
interchangeable
12809Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
72551R91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S93717?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S93717?
S93717 is a PIN,STRAIGHT,HEADLESS.
What parts can replace S93717?
There are 11 known substitutes for S93717: 72188, A72188, 50472 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S93717?
S93717 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-067-9726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S93717

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026