PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 115C6011P33
115C6011P33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BONDING STRIP, overall_width: 0.484 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-999-0381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115C6011P33
NSN: 5340-00-999-0381
FSC: 5340
CAGE: 99207 — GENERAL ELECTRIC COMPANY DBA GE AEROSPACE (USA)
SPECIFICATIONS
diameter0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING BONDING STRIP
overall_width0.484 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter0.375 INCHES NOMINAL IN
cushioning_environmental_protectionCORROSION RESISTANT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.806 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.593 INCHES NOMINAL IN
NSN5340-00-999-0381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 115C6011P33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.806 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING BONDING STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
DIAMETER: 0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.806 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING BONDING STRIP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
DIAMETER0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
CUSHIONING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.593 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
4325Upgraded Successor
successor cross-reference
successor
SM-C-860308-1Upgraded Successor
successor cross-reference
successor
0W363Interchangeable
interchangeable cross-reference
interchangeable
01845-1446Interchangeable
interchangeable cross-reference
interchangeable
208377Interchangeable
interchangeable cross-reference
interchangeable
D15463PPC442AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 115C6011P33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115C6011P33?
115C6011P33 is a CLAMP,LOOP.
What parts can replace 115C6011P33?
There are 12 known substitutes for 115C6011P33: 4325, SM-C-860308-1, 0W363 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 115C6011P33?
115C6011P33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-999-0381. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115C6011P33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026