PartsTable
Technical Data Sheet
4325 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Multibrackets M Safety - Anti Theft Screws Pack M5 & M6 is designed to secure wall-mounted products such as TV wall mounts, flex arms, and other installations by providing tamper-resistant screws. These screws are installed on the backside of your TV or mount, enhancing protection against theft while maintaining a secure fit.<br><br>Specifically developed for Multibrackets casings and enclosures, this screw pack replaces original screws with anti-theft variants to ensure tamper-proof closure. This enhances security for applications where casings must remain locked and protected from unauthorized access.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-197-8165, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 4325
NSN: 5340-00-197-8165
FSC: 5340
CAGE: 1TUY2 — TITAN DISTRIBUTION INC DBA TITAN TIRE (USA)
SPECIFICATIONS
width1.900 INCHES NOMINAL IN
diameter0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
body_styleW/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
body_width1.188 INCHES NOMINAL IN
head_styleHEXAGON
body_height4.250 INCHES NOMINAL IN
body_length2.500 INCHES NOMINAL IN
design_typeWHIP SINGLE ANTENNA ELEMENT
closed_length15.000 INCHES NOMINAL IN
coil_quantity9-3/4
NSN5340-00-197-8165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4325 MFR: Multibrackets ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4325Upgraded Successor
successor cross-reference
successor
115C6011P33Upgraded Successor
successor cross-reference
successor
SM-C-860308-1Upgraded Successor
successor cross-reference
successor
12555011Upgraded Successor
successor cross-reference
successor
0W363Interchangeable
interchangeable cross-reference
interchangeable
01845-1446Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4325?
4325 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4325?
There are 14 known substitutes for 4325: 4325, 115C6011P33, SM-C-860308-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4325?
4325 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-197-8165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4325