PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 115-206
115-206 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,ACTUATING,LINE. Key specifications include material: STEEL OVERALL, cone_width: 1.6250 INCHES NOMINAL IN, port_style: UNABLE TO DECODE, body_material: STEEL, bore_diameter: 2.7500 INCHES NOMINAL IN, extended_length: 35.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115-206
NSN: 3110-00-100-0663
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.6250 INCHES NOMINAL IN
port_styleUNABLE TO DECODE
body_materialSTEEL
bore_diameter2.7500 INCHES NOMINAL IN
extended_length35.500 INCHES NOMINAL IN
overall_diameter4.250 INCHES NOMINAL IN
special_featuresAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.4400 IN. IN
style_designatorNORMAL ANGLE
compressed_length26.000 INCHES NOMINAL IN
port_thread_classUNABLE TO DECODE
seat_angle_in_degUNABLE TO DECODE
NSN3110-00-100-0663
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 115-206 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 1.6250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.7500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE WIDTH1.6250 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.4400 IN. IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7060Interchangeable
interchangeable cross-reference
interchangeable
NNNP00350Interchangeable
interchangeable cross-reference
interchangeable
MS35980-5Interchangeable
interchangeable cross-reference
interchangeable
115-206Interchangeable
interchangeable cross-reference
interchangeable
2195-115-200Interchangeable
interchangeable cross-reference
interchangeable
104111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 115-206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115-206?
115-206 is a CYLINDER ASSEMBLY,ACTUATING,LINE.
What parts can replace 115-206?
There are 23 known substitutes for 115-206: 7060, NNNP00350, MS35980-5 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 115-206?
115-206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115-206

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026