PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9608M10P04
9608M10P04 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, material_thickness: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, loop_inside_diameter: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-143-0223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9608M10P04
NSN: 5340-00-143-0223
FSC: 5340
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
diameter0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
materialSTEEL COMP 321 BAND
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
material_thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter0.250 INCHES NOMINAL IN
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.369 INCHES MINIMUM AND 1.459 INCHES MAXIMUM IN
center_to_center_distance_between_first_and_second_holes0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.129 INCHES MINIMUM AND 1.199 INCHES MAXIMUM IN
NSN5340-00-143-0223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9608M10P04 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
DIAMETER: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.369 INCHES MINIMUM AND 1.459 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
DIAMETER0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.369 INCHES MINIMUM AND 1.459 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.129 INCHES MINIMUM AND 1.199 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
643Interchangeable
interchangeable cross-reference
interchangeable
827434Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9608M10P04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9608M10P04?
9608M10P04 is a CLAMP,LOOP.
What parts can replace 9608M10P04?
There are 2 known substitutes for 9608M10P04: 643, 827434. Substitute compatibility should be verified for your specific system.
What is the NSN for 9608M10P04?
9608M10P04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-143-0223. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9608M10P04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026