PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114607
114607 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN, outside_diameter: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, material_thickness: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114607
NSN: 5310-00-011-4607
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
hole_diameter0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
outside_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
material_thickness0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
NSN5310-00-011-4607
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 114607 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
135629Interchangeable
interchangeable cross-reference
interchangeable
1229V515Interchangeable
interchangeable cross-reference
interchangeable
11.00-22Interchangeable
interchangeable cross-reference
interchangeable
X/GP3/TYBB/CLR/T/11.00-22/12PLYInterchangeable
interchangeable cross-reference
interchangeable
11-22.00Interchangeable
interchangeable cross-reference
interchangeable
5000-6-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114607?
114607 is a WASHER,LOCK.
What parts can replace 114607?
There are 17 known substitutes for 114607: 135629, 1229V515, 11.00-22 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114607?
114607 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026