PartsTable
Technical Data Sheet
114598 ✓ Verified by PartsTable
Nissin · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

An iconic dish from the heart of Bangkok – Cup Noodles Soba Pad Thai is the delicious and ever surprising combination of freshness and umami! Slightly tangy lime und hearty peanut meet the richness of fish sauce and lead to an irresistible taste that is loved all around the world. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-4598, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114598
NSN: 5305-00-011-4598
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL UNS K08500 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating0.890 POUNDS NOMINAL LBS
coil_quantity12
inside_diameter0.116 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
spring_free_length0.640 INCHES NOMINAL IN
spring_solid_length0.250 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate8.850 POUNDS PER INCH NOMINAL LBS
spring_length_under_load0.540 INCHES NOMINAL IN
NSN5305-00-011-4598
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 114598 · Nissin ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD CLASS: 2A A
THREAD QUANTITY PER INCH: 11
INTERNAL DRIVE STYLE: W/O INTERNAL DRIVE
FASTENER LENGTH: 2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS: 0.606 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH: 2.750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
THREAD QUANTITY PER INCH11
INTERNAL DRIVE STYLEW/O INTERNAL DRIVE
FASTENER LENGTH2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.606 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH2.750 INCHES MAXIMUM IN
HEAD HEIGHT0.452 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
HEAD STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6194Interchangeable
interchangeable cross-reference
interchangeable
FFS103TYPE1STYLE3Interchangeable
interchangeable cross-reference
interchangeable
102430Interchangeable
interchangeable cross-reference
interchangeable
102454Interchangeable
interchangeable cross-reference
interchangeable
0902203Interchangeable
interchangeable cross-reference
interchangeable
12X206 3-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114598?
114598 is a SPRING,HELICAL,COMPRESSION manufactured by Nissin.
What parts can replace 114598?
There are 14 known substitutes for 114598: 6194, FFS103TYPE1STYLE3, 102430 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114598?
114598 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-4598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114598