PartsTable
Technical Data Sheet
Download PDF

102430 — 102430

✓ Government record, cited
KitchenAid · MRO · MRO_GENERAL
PRODUCT OVERVIEW

102430: 102430.

The 102430 is a KitchenAid industrial component. Key specifications include end_item_identification: COLLET. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-010-2430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102430
NSN: 5305-00-010-2430
NIINs: 000102430, 000414620, 009483647, 010138892, 010256830, 010383377, 015305127
FSC: 5305 — Screws
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_item_identificationCOLLET
NSN5305-00-010-2430
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 102430 · KitchenAid ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.178 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: SQUARE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.178 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
POINT STYLEOVAL
WIDTH BETWEEN FLATS0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
FFS103TYPE1STYLE3Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 102430?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102430?
102430 is a 102430 manufactured by KitchenAid. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102430?
There is 1 known substitute for 102430: FFS103TYPE1STYLE3. Substitute compatibility should be verified for your specific system.
What is the NSN for 102430?
102430 is cataloged in the U.S. Government catalog under NSN 5305-00-010-2430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102430

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.