PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1142007-1
1142007-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include material: STEEL COMP 4037 STUD, head_length: 0.850 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, eyelet_length: 0.220 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, stud_assembly_style: STUD ASSEMBLY, eyelet_outside_diameter: 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-290-3822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1142007-1
NSN: 5325-00-290-3822
FSC: 5325
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 STUD
head_length0.850 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
eyelet_length0.220 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT COUNTERSUNK WING
material_accommodated_thickness0.021 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
distance_from_engaging_member_to_largest_bearing_surface_of_head0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NSN5325-00-290-3822
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1142007-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
•
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 4037 STUD
•
EYELET LENGTH: 0.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4037 STUD
EYELET LENGTH0.220 INCHES NOMINAL IN
MATERIALSTEEL EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIALSTEEL PIN
HEAD LENGTH0.850 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIALSTEEL EYELET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
A244313-3Interchangeable
interchangeable cross-reference
interchangeable
23BInterchangeable
interchangeable cross-reference
interchangeable
50520Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1142007-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1142007-1?
1142007-1 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 1142007-1?
There are 3 known substitutes for 1142007-1: A244313-3, 23B, 50520. Substitute compatibility should be verified for your specific system.
What is the NSN for 1142007-1?
1142007-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-290-3822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1142007-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026