PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50520
50520 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This smart Scart splitter allows you to connect two video devices (V1 + V2) to a single Scart input on the television. The V2 signal is displayed by selecting AV on V1. This allows you to use the remote control for the V1 video device to control whether you view the signal from V2.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50520
NSN: 3110-00-227-2351
FSC: 3110
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialGLASS PROTECTIVE CRYSTAL
dial_size2-1/2 IN. DIA IN
bezel_typeSLIPS-ON
scale_namePRESSURE
scale_typeSINGLE
scale_range+0.0 TO 200.0 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_typeINDICATING
usage_designFOR GENERAL USE WHERE MEDIA WILL NOT ATTACK BRASS OR BRONZE
adjustabilityNONADJUSTABLE
bore_diameter1.2500 INCHES NOMINAL IN
overall_depth1.938 INCHES NOMINAL IN
pointer_colorWHITE
NSN3110-00-227-2351
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50520 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
SURFACE FINISHGROUND
INNER RING WIDTH1.2500 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
BORE DIAMETER1.2500 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
4NBC612ZPANG25Interchangeable
interchangeable cross-reference
interchangeable
505-4Interchangeable
IBM Flex System FC5054 4-Port FC-16GB Adapter
interchangeable
AS24461-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50520?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50520?
50520 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by Sandberg.
What parts can replace 50520?
There are 33 known substitutes for 50520: 3NBC511ZP, 505-3, MS24461-3 and 30 more. Substitute compatibility should be verified for your specific system.
Is 50520 still available?
50520 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50520

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026