PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1142005-13
1142005-13 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN, material: STEEL COMP 4037 STUD, drive_type: CROSS RECESS, eyelet_length: 0.532 INCHES NOMINAL IN, stud_head_height: 0.102 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-091-6200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1142005-13
NSN: 5325-01-091-6200
FSC: 5325
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
diameter0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
materialSTEEL COMP 4037 STUD
drive_typeCROSS RECESS
eyelet_length0.532 INCHES NOMINAL IN
stud_head_height0.102 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
turnlock_stud_head_styleSTUD HEAD
material_accommodated_thickness0.411 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-01-091-6200
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1142005-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL ACCOMMODATED THICKNESS: 0.411 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
EYELET LENGTH: 0.532 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
•
STUD ASSEMBLY STYLE: STUD ASSEMBLY
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
EYELET OUTSIDE DIAMETER: 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL ACCOMMODATED THICKNESS0.411 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
EYELET LENGTH0.532 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
EYELET OUTSIDE DIAMETER0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
MATERIALSTEEL PIN
MATERIALSTEEL COMP 4037 STUD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
BACS21X13RInterchangeable
interchangeable cross-reference
interchangeable
4002-13Interchangeable
interchangeable cross-reference
interchangeable
12861-899-45Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1142005-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1142005-13?
1142005-13 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 1142005-13?
There are 3 known substitutes for 1142005-13: BACS21X13R, 4002-13, 12861-899-45. Substitute compatibility should be verified for your specific system.
What is the NSN for 1142005-13?
1142005-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-091-6200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1142005-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026