PartsTable
Technical Data Sheet
4002-13 ✓ Verified by PartsTable
Electrolux · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

An effective rinse system uses only 3 liters of clean hot water per basket for lower running costs.<br><br>Fully automatic self-cleaning cycle avoids the risk of bacteria proliferation.<br><br>Simple control panel with digital display allows on-site personalization of washing and rinsing cycle times and temperatures as well as precise rinse aid and detergent quantities to suit customer's needs.<br><br>Washing system endowed with rotating washing arms, high powered wash pump and large capacity <br>boiler for professional washing.<br><br>Simple service from the front.<br><br>Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.<br><br>Three phase or single phase electrical connection, convertible on-site.<br><br>Pre-arrangement for HACCP system implementation and Energy Management device<br><br>State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-167-3686, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
4002-13
NSN: 5306-00-167-3686
FSC: 5306
CAGE: 77294 — PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC DIV PIPER INDUSTRIAL MANUFACTURING COMPANY (USA)
SPECIFICATIONS
diameter0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
materialSTEEL
drive_typeSLOTTED
head_styleHEXAGON
grip_length1.422 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
head_height0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
thread_class3A A
eyelet_length0.532 INCHES NOMINAL IN
step_quantity4
thread_length0.609 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
end_similarityIDENTICAL
overall_length1.550 INCHES NOMINAL IN
NSN5306-00-167-3686
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4002-13 · Electrolux ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
WIDTH BETWEEN FLATS: 0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
HEAD HEIGHT: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
FASTENER LENGTH: 2.062 INCHES MINIMUM AND 2.109 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 1.422 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
HEAD HEIGHT0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
FASTENER LENGTH2.062 INCHES MINIMUM AND 2.109 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH1.422 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2140-0094Interchangeable
interchangeable cross-reference
interchangeable
7153Interchangeable
interchangeable cross-reference
interchangeable
OL-7153Interchangeable
interchangeable cross-reference
interchangeable
BACS21X13RInterchangeable
interchangeable cross-reference
interchangeable
4002-13Interchangeable
interchangeable cross-reference
interchangeable
12861-899-45Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4002-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4002-13?
4002-13 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Electrolux.
What parts can replace 4002-13?
There are 9 known substitutes for 4002-13: 2140-0094, 7153, OL-7153 and 6 more. Substitute compatibility should be verified for your specific system.
Is 4002-13 still available?
4002-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4002-13