PartsTable
Technical Data Sheet
Download PDF

11401071 — ADAPTER,STRAIGHT,PIPE TO TUBE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11401071: ADAPTER,STRAIGHT,PIPE TO TUBE.

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, seat_angle: 30.0 DEGREES FIRST END, connection_type: THREADED EXTERNAL PIPE SECOND END, connection_style: SWIVEL NUT INVERTED FLARE (PIPE) FIRST END, special_features: NOMENCLATURE PER NAVY: FUSE, 1.0A TYPE GMA A, style_designator: RIGID, THREADED INTERNAL AND EXTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-958-0382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11401071
NSN: 4730-00-958-0382
NIINs: 009580382, 015220149
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
seat_angle30.0 DEGREES FIRST END
connection_typeTHREADED EXTERNAL PIPE SECOND END
connection_styleSWIVEL NUT INVERTED FLARE (PIPE) FIRST END
special_featuresNOMENCLATURE PER NAVY: FUSE, 1.0A TYPE GMA A
style_designatorRIGID, THREADED INTERNAL AND EXTERNAL
nominal_thread_size1.250 INCHES ALL ENDS IN
nominal_overall_length2.060 INCHES IN
thread_series_designatorNPSM FIRST END
nondefinitive_spec/std_data47A FIGURE A
specification/standard_data81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
continuous_current_rating_in_amps1.000
NSN4730-00-958-0382
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 11401071 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: J514 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION STYLE: SWIVEL NUT INVERTED FLARE (PIPE) FIRST END
•
NOMINAL OVERALL LENGTH: 2.060 INCHES IN
•
CONNECTION TYPE: THREADED INTERNAL PIPE FIRST END
•
STYLE DESIGNATOR: RIGID, THREADED INTERNAL AND EXTERNAL
•
NOMINAL THREAD SIZE: 1.250 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONJ514 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
CONNECTION STYLESWIVEL NUT INVERTED FLARE (PIPE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
NOMINAL OVERALL LENGTH2.060 INCHES IN
CONNECTION TYPETHREADED INTERNAL PIPE FIRST END
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
STYLE DESIGNATORRIGID, THREADED INTERNAL AND EXTERNAL
NOMINAL THREAD SIZE1.250 INCHES ALL ENDS IN
SEAT ANGLE30.0 DEGREES FIRST END
SPECIFICATION/STANDARD DATA81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 9
SAE-J514Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-J514-3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
60SA-20X20Reference document
Same NSN cross-reference
Reference document — Secondary reference
1028-20-20SReference document
Same NSN cross-reference
Reference document — Secondary reference
20MP20FPXReference document
Same NSN cross-reference
Reference document — Secondary reference
J514Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11401071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11401071?
11401071 is a ADAPTER,STRAIGHT,PIPE TO TUBE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11401071?
There are 9 known substitutes for 11401071: SAE-J514, SAE-J514-3, 60SA-20X20 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11401071?
11401071 is cataloged in the U.S. Government catalog under NSN 4730-00-958-0382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11401071

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.