PartsTable
Technical Data Sheet
Download PDF

11359-89 — SWITCH,PUSH

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11359-89: SWITCH,PUSH.

The SWITCH,PUSH is a the manufacturer industrial component. Key specifications include ratchet: NOT INCLUDED, material: ALUMINUM ALLOY WHEEL, body_style: BUSHING MOUNTED, hub_length: 0.875 INCHES NOMINAL IN, body_length: 0.657 INCHES NOMINAL IN, drive_width: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-285-1869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11359-89
NSN: 5340-00-285-1869
NIINs: 002851869, 013218128
FSC: 5340 — Hardware, Commercial
CAGE: 58037 — ELLIOTT B W MFG CO LLC FLEX SHAFT AND VALVE CONTROL PRODUCT LINES (USA)
SPECIFICATIONS
ratchetNOT INCLUDED
materialALUMINUM ALLOY WHEEL
body_styleBUSHING MOUNTED
hub_length0.875 INCHES NOMINAL IN
body_length0.657 INCHES NOMINAL IN
drive_width0.562 INCHES NOMINAL IN
body_diameter0.562 INCHES NOMINAL IN
overall_width0.875 INCHES NOMINAL IN
bushing_length0.312 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height0.875 INCHES NOMINAL IN
overall_length1.500 INCHES MAXIMUM IN
NSN5340-00-285-1869
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11359-89 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HUB OUTSIDE DIAMETER: 1.875 INCHES NOMINAL IN
•
HANDLE ROTATING FEATURE: NOT INCLUDED
•
HUB LENGTH: 0.875 INCHES NOMINAL IN
•
DRIVE WIDTH: 0.562 INCHES NOMINAL IN
•
HANDLE COUNTERBALANCING WEIGHT: NOT INCLUDED
•
SPOKE ANGLE IN DEG: 90.0
•
RATCHET: NOT INCLUDED
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.875 INCHES NOMINAL IN
HUB OUTSIDE DIAMETER1.875 INCHES NOMINAL IN
HANDLE ROTATING FEATURENOT INCLUDED
HUB LENGTH0.875 INCHES NOMINAL IN
DRIVE WIDTH0.562 INCHES NOMINAL IN
HANDLE COUNTERBALANCING WEIGHTNOT INCLUDED
SPOKE ANGLE IN DEG90.0
RATCHETNOT INCLUDED
OUTSIDE DIAMETER8.000 INCHES NOMINAL IN
DRIVE FACILITY STYLESQUARE
SUBSTITUTES & CROSS-REFERENCES 3
11359-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5000S4824-1385620Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
S11359-004Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11359-89?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11359-89?
11359-89 is a SWITCH,PUSH. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11359-89?
There are 3 known substitutes for 11359-89: 11359-4, 5000S4824-1385620, S11359-004. Substitute compatibility should be verified for your specific system.
What is the NSN for 11359-89?
11359-89 is cataloged in the U.S. Government catalog under NSN 5340-00-285-1869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11359-89