PartsTable
Technical Data Sheet
Download PDF

5000S4824-1385620 — HANDWHEEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5000S4824-1385620: HANDWHEEL.

The HANDWHEEL is a the manufacturer industrial component. Key specifications include ratchet: NOT INCLUDED, material: COPPER ALLOY OVERALL, hub_length: 0.500 INCHES NOMINAL IN, drive_width: 0.312 INCHES NOMINAL IN, overall_depth: 0.500 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-285-1846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5000S4824-1385620
NSN: 5340-00-285-1846
NIINs: 002851846, 002851856, 002851865, 002851866, 002851867, 002851868, 002851869, 002851870, 002851871, 002851872, 002851880, 002851881
FSC: 5340 — Hardware, Commercial
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
ratchetNOT INCLUDED
materialCOPPER ALLOY OVERALL
hub_length0.500 INCHES NOMINAL IN
drive_width0.312 INCHES NOMINAL IN
overall_depth0.500 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
spoke_quantity3
handwheel_styleSPOKES
outside_diameter4.000 INCHES NOMINAL IN
special_featuresSQUARE DRIVE TAPERED
spoke_angle_in_deg120.0
drive_facility_styleSQUARE
NSN5340-00-285-1846
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5000S4824-1385620 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HUB OUTSIDE DIAMETER: 5.000 INCHES NOMINAL IN
•
HANDLE ROTATING FEATURE: NOT INCLUDED
•
HUB LENGTH: 2.062 INCHES NOMINAL IN
•
DRIVE WIDTH: 3.302 INCHES NOMINAL IN
•
HANDLE COUNTERBALANCING WEIGHT: NOT INCLUDED
•
SPOKE ANGLE IN DEG: 60.0
•
RATCHET: NOT INCLUDED
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.062 INCHES NOMINAL IN
HUB OUTSIDE DIAMETER5.000 INCHES NOMINAL IN
HANDLE ROTATING FEATURENOT INCLUDED
HUB LENGTH2.062 INCHES NOMINAL IN
DRIVE WIDTH3.302 INCHES NOMINAL IN
HANDLE COUNTERBALANCING WEIGHTNOT INCLUDED
SPOKE ANGLE IN DEG60.0
RATCHETNOT INCLUDED
OUTSIDE DIAMETER24.000 INCHES NOMINAL IN
DRIVE FACILITY STYLESQUARE
SUBSTITUTES & CROSS-REFERENCES 2
1385620Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
1385620-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5000S4824-1385620?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5000S4824-1385620?
5000S4824-1385620 is a HANDWHEEL.
What parts can replace 5000S4824-1385620?
There are 2 known substitutes for 5000S4824-1385620: 1385620, 1385620-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 5000S4824-1385620?
5000S4824-1385620 is cataloged in the U.S. Government catalog under NSN 5340-00-285-1846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5000S4824-1385620

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.