PartsTable
Technical Data Sheet
Download PDF

11346 — BRUSH,ELECTRICAL CONTACT

✓ Government record, cited
Jumbo · ORING SEAL
PRODUCT OVERVIEW

11346: BRUSH,ELECTRICAL CONTACT.

The BRUSH,ELECTRICAL CONTACT is a Jumbo industrial component. Key specifications include shape: IRREGULAR, width: 0.330 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, length: 0.510 INCHES NOMINAL IN, radius: 0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BLADE, thickness: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-008-9029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11346
NSN: 5331-00-008-9029
NIINs: 000089029, 003359315, 003604400, 004418190, 005074629, 006184440, 009354162, 009890500, 011507992, 013100990, 013889785, 013994661, 015947022
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
shapeIRREGULAR
width0.330 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
length0.510 INCHES NOMINAL IN
radius0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING BLADE
quantity6
thickness0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
blade_typeSOLID
body_styleRECTANGULAR COMMUTATOR
blade_width9.750 INCHES NOMINAL IN
design_formONE-PIECE
blade_length25.000 MILLIMETERS NOMINAL MM
NSN5331-00-008-9029
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11346 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 3
346-7657Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
22019-346Reference document
Same NSN cross-reference
Reference document — Secondary reference
11-346-7505-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11346?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11346?
11346 is a BRUSH,ELECTRICAL CONTACT manufactured by Jumbo.
What parts can replace 11346?
There are 3 known substitutes for 11346: 346-7657, 22019-346, 11-346-7505-70. Substitute compatibility should be verified for your specific system.
What is the NSN for 11346?
11346 is cataloged in the U.S. Government catalog under NSN 5331-00-008-9029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11346