PartsTable
Technical Data Sheet
Download PDF

22019-346 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22019-346: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-008-9029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22019-346
NSN: 5331-00-008-9029
FSC: 5331 — O-ring
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-008-9029
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22019-346 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.085 INCHES MINIMUM AND 4.115 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 3
346-7657Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
11-346Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
11-346-7505-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 22019-346?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22019-346?
22019-346 is a O-RING.
What parts can replace 22019-346?
There are 3 known substitutes for 22019-346: 346-7657, 11-346, 11-346-7505-70. Substitute compatibility should be verified for your specific system.
What is the NSN for 22019-346?
22019-346 is cataloged in the U.S. Government catalog under NSN 5331-00-008-9029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22019-346