PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 112301
112301 ✓ Verified by PartsTable
Equip · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The equip® Power Cord is designed to carry clear and crisp electricity, building a sustainable power supply environment. Key specifications include functional_description: USED TO ALIGN TILT RAM WITH HOUSING TO AID INSTALLATION OF PIVOT PIN, end_item_identification: ANTI-CORROSION COVER, part_name_assigned_by_controlling_agency: CV/CVN LRLS COVER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-937-0561, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
112301
NSN: 4720-00-937-0561
FSC: 4720
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
special_featuresCOMPONENTS INCLUDE: FABRIC, SHELL A/R; ABSORBENT QUILT A/R; FABRIC, MESH A/R; FABRIC, BALLISTIC A/R; TAPE, SEAM A/R; GROMMET 4PCS; WASHER 4PCS; WEBBING A/R; BUCKLE 2PCS
functional_descriptionUSED TO ALIGN TILT RAM WITH HOUSING TO AID INSTALLATION OF PIVOT PIN
end_item_identificationANTI-CORROSION COVER
part_name_assigned_by_controlling_agencyCV/CVN LRLS COVER
NSN4720-00-937-0561
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 112301 · Equip ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 2.213 INCHES NOMINAL IN
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND WEATHERPROOF AND OIL RESISTANT AND OZONE RESISTANT AND FUEL RESISTANT
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
NONDEFINITIVE SPEC/STD DATA: AT TYPE
•
HYDROSTATIC TEST PRESSURE: 2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE
•
OPERATING PRESSURE: 1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER2.213 INCHES NOMINAL IN
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND WEATHERPROOF AND OIL RESISTANT AND OZONE RESISTANT AND FUEL RESISTANT
MATERIALRUBBER SYNTHETIC TUBE
NONDEFINITIVE SPEC/STD DATAAT TYPE
HYDROSTATIC TEST PRESSURE2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE
OPERATING PRESSURE1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-SAE100R2-AT PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
001-1002-00-0-479Interchangeable
interchangeable cross-reference
interchangeable
301-24Interchangeable
interchangeable cross-reference
interchangeable
FTSM7Interchangeable
interchangeable cross-reference
interchangeable
71750Interchangeable
interchangeable cross-reference
interchangeable
313407Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 112301?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112301?
112301 is a HOSE ASSEMBLY,NONMETALLIC,FIRE F manufactured by Equip.
What parts can replace 112301?
There are 18 known substitutes for 112301: 001-1002-00-0-479, 301-24, FTSM7 and 15 more. Substitute compatibility should be verified for your specific system.
Is 112301 still available?
112301 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112301

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026