PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 313407
313407 ✓ Verified by PartsTable
Intellinet · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Augmented Category 6 (Cat6a)<br>- 10 Gigabit Ethernet qualified<br>- 500 MHz<br>- Screened, fully shielded twisted pair cable<br>- Connection distances of up to 100 meters<br>- Compatible with T568A and T568B wiring<br>- Supports IEEE 802.3af and is DTE power compliant<br>- Fully backward compatible with all the previous cable categories, including Category 6, 5e and 5 This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
313407
NSN: 3110-00-100-0614
FSC: 3110
CAGE: 40152 — VME AMERICAS INC SUB OF VME GROUP N V (USA)
SPECIFICATIONS
materialALUMINUM ALLOY SINGLE END
design_formPREBENT
thread_class3B SINGLE END
wall_thickness0.065 INCHES NOMINAL IN
thread_directionRIGHT-HAND SINGLE END
seat_angle_in_deg33.0 SINGLE END
mating_end_quantity2 SINGLE END
nominal_thread_size0.312 INCHES SINGLE END IN
end_connection_styleSWIVEL NUT WITH COMPRESSION SLEEVE SINGLE END
tube_outside_diameter1.000 INCHES NOMINAL IN
end_connection_spec/stdMIL,MS20819,P/N MS20819-16D AND ANA,AN818,PN AN818-16D
thread_series_designatorUNIFIED NATIONAL JOINT (UNJ) SINGLE END
NSN3110-00-100-0614
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 313407 · Intellinet ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 7.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.3750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER7.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
X4-55Interchangeable
interchangeable cross-reference
interchangeable
10-2161Interchangeable
interchangeable cross-reference
interchangeable
001-1002-00-0-479Interchangeable
interchangeable cross-reference
interchangeable
301-24Interchangeable
interchangeable cross-reference
interchangeable
FTSM7Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 313407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 313407?
313407 is a CUP,TAPERED ROLLER BEARING manufactured by Intellinet.
What parts can replace 313407?
There are 19 known substitutes for 313407: X4-55, 10-2161, 001-1002-00-0-479 and 16 more. Substitute compatibility should be verified for your specific system.
Is 313407 still available?
313407 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 313407

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026