PartsTable
Technical Data Sheet
Download PDF

11.1002 — TIE ROD END,STEERING

✓ Government record, cited
Beko · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11.1002: TIE ROD END,STEERING.

The TIE ROD END,STEERING is a Beko industrial component. Key specifications include height: 0.203 INCHES NOMINAL IN, diameter: 0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, ball_stud: INCLUDED, body_style: RECTANGULAR PLUG-IN, head_style: FLAT CHAMFER. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-4460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11.1002
NSN: 5315-00-276-4460
NIINs: 002764460, 004592762, 011398816, 012591880, 015060300, 017178075
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
height0.203 INCHES NOMINAL IN
diameter0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
ball_studINCLUDED
body_styleRECTANGULAR PLUG-IN
head_styleFLAT CHAMFER
design_typeBALL STUD
thread_size5/8-18
taper_length0.820 INCHES NOMINAL IN
overall_width3.80 MILLIMETERS NOMINAL MM
thread_length0.906 INCHES NOMINAL IN
chamfer_length0.141 INCHES NOMINAL IN
NSN5315-00-276-4460
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11.1002 · Beko ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.141 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.609 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.812 INCHES NOMINAL IN
•
DIAMETER: 0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.141 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.609 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.812 INCHES NOMINAL IN
DIAMETER0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.203 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 9
18653DReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
T1712-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
4-716-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
K542Reference document
Same NSN cross-reference
Reference document — Secondary reference
75293Reference document
Same NSN cross-reference
Reference document — Secondary reference
5898-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 11.1002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11.1002?
11.1002 is a TIE ROD END,STEERING manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11.1002?
There are 9 known substitutes for 11.1002: 18653D, T1712-1, 4-716-12 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11.1002?
11.1002 is cataloged in the U.S. Government catalog under NSN 5315-00-276-4460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11.1002