PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75293
75293 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, overall_width: 8.062 INCHES NOMINAL IN, aperture_width: 6.812 INCHES NOMINAL IN, gage_thickness: 0.019 INCHES NOMINAL IN, overall_length: 13.000 INCHES NOMINAL IN, aperture_length: 11.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4460, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75293
NSN: 5315-00-276-4460
FSC: 5315
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
materialIRON OVERALL
overall_width8.062 INCHES NOMINAL IN
aperture_width6.812 INCHES NOMINAL IN
gage_thickness0.019 INCHES NOMINAL IN
overall_length13.000 INCHES NOMINAL IN
aperture_length11.750 INCHES NOMINAL IN
inside_corner_radius2.000 INCHES NOMINAL IN
outside_corner_radius2.625 INCHES NOMINAL IN
center_to_center_distance0.125 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
NSN5315-00-276-4460
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 75293 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.141 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
FIRST HOLE DIAMETER: 0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.616 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
CHAMFER LENGTH0.141 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
FIRST HOLE DIAMETER0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEONE END DRILLED
SPECIAL FEATURESWITH COTTER PIN
HEIGHT0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
0539-5Interchangeable
interchangeable cross-reference
interchangeable
039549Interchangeable
interchangeable cross-reference
interchangeable
10670724-2Interchangeable
interchangeable cross-reference
interchangeable
30Interchangeable
interchangeable cross-reference
interchangeable
COUPLER,RH ITEMInterchangeable
interchangeable cross-reference
interchangeable
C50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75293?
75293 is a GASKET.
What parts can replace 75293?
There are 25 known substitutes for 75293: 0539-5, 039549, 10670724-2 and 22 more. Substitute compatibility should be verified for your specific system.
Is 75293 still available?
75293 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75293

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026