PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16T13
16T13 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 60.00 MILLIMETERS NOMINAL MM, overall_width: 31.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16T13
NSN: 3110-00-155-6777
FSC: 3110
CAGE: 04285 — ATHEY PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter60.00 MILLIMETERS NOMINAL MM
overall_width31.00 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter130.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6777
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 16T13 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
OVERALL WIDTH31.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL SHIELD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
7312Interchangeable
interchangeable cross-reference
interchangeable
5003-7Interchangeable
interchangeable cross-reference
interchangeable
177009-95Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
1312SInterchangeable
interchangeable cross-reference
interchangeable
700290Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16T13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16T13?
16T13 is a BEARING,BALL,ANNULAR.
What parts can replace 16T13?
There are 27 known substitutes for 16T13: 7312, 5003-7, 177009-95 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16T13?
16T13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16T13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026