PartsTable
Technical Data Sheet
PartsTable / O-RING / 10V60-141-117
10V60-141-117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN, center_hole_diameter: 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-250-0222, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10V60-141-117
NSN: 5331-00-250-0222
FSC: 5331 — O-RING
CAGE: 73277 — HOUGHTON INTERNATIONAL INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN
center_hole_diameter0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-250-0222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10V60-141-117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
40109-27Interchangeable
interchangeable cross-reference
interchangeable
S6860Interchangeable
interchangeable cross-reference
interchangeable
8117Interchangeable
interchangeable cross-reference
interchangeable
7076964Interchangeable
interchangeable cross-reference
interchangeable
30282-3Interchangeable
interchangeable cross-reference
interchangeable
2306-17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10V60-141-117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10V60-141-117?
10V60-141-117 is a O-RING.
What parts can replace 10V60-141-117?
There are 25 known substitutes for 10V60-141-117: 40109-27, S6860, 8117 and 22 more. Substitute compatibility should be verified for your specific system.
Is 10V60-141-117 still available?
10V60-141-117 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10V60-141-117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026