PartsTable / O-RING / 2306-17
2306-17
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN, center_hole_diameter: 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-250-0222, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2306-17
NSN: 5331-00-250-0222 FSC: 5331 — O-RINGCAGE: 3G229 — DEV-AIR CORPORATION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN center_hole_diameter 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-250-0222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2306-17
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.793 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.989 INCHES MINIMUM AND 1.021 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
40109-27 Interchangeable interchangeable cross-reference
interchangeable
S6860 Interchangeable interchangeable cross-reference
interchangeable
8117 Interchangeable interchangeable cross-reference
interchangeable
7076964 Interchangeable interchangeable cross-reference
interchangeable
30282-3 Interchangeable interchangeable cross-reference
interchangeable
2306-17 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2306-17?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2306-17?
2306-17 is a FILTER ELEMENT,FLUID.
What parts can replace 2306-17?
There are 26 known substitutes for 2306-17: 40109-27, S6860, 8117 and 23 more. Substitute compatibility should be verified for your specific system.
Is 2306-17 still available?
2306-17 is currently cancelled.
Request a Quote — 2306-17