PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10P50N-S
10P50N-S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 1.254 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-3668, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10P50N-S
NSN: 5330-00-085-3668
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter1.254 INCHES NOMINAL IN
surface_treatmentCADMIUM CASE
housing_bore_diameter1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
accommodated_shaft_maximum_rated_speed100 FEET PER MINUTE FT
NSN5330-00-085-3668
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10P50N-S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 100 FEET PER MINUTE FT
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED100 FEET PER MINUTE FT
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5707Interchangeable
interchangeable cross-reference
interchangeable
14U1452PCDD5707Interchangeable
interchangeable cross-reference
interchangeable
5119173Interchangeable
interchangeable cross-reference
interchangeable
520085Interchangeable
interchangeable cross-reference
interchangeable
5707-5Interchangeable
interchangeable cross-reference
interchangeable
471535Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10P50N-S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10P50N-S?
10P50N-S is a SEAL,PLAIN ENCASED.
What parts can replace 10P50N-S?
There are 15 known substitutes for 10P50N-S: 5707, 14U1452PCDD5707, 5119173 and 12 more. Substitute compatibility should be verified for your specific system.
Is 10P50N-S still available?
10P50N-S is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10P50N-S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026