PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 471535
471535 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL CASE, overall_length: 6.500 INCHES NOMINAL IN, overall_diameter: 1.000 INCHES NOMINAL IN, case_surface_treatment: PAINT, detecting_element_type: SCINTILLATION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-3668, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
471535
NSN: 5330-00-085-3668
FSC: 5330
CAGE: 81596 — FEDERAL-MOGUL CORP SEALING PRODUCTS GROUP VAN WERT PLANT (USA)
SPECIFICATIONS
materialSTEEL CASE
overall_length6.500 INCHES NOMINAL IN
overall_diameter1.000 INCHES NOMINAL IN
case_surface_treatmentPAINT
detecting_element_typeSCINTILLATION
NSN5330-00-085-3668
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 471535 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 100 FEET PER MINUTE FT
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED100 FEET PER MINUTE FT
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5707Interchangeable
interchangeable cross-reference
interchangeable
14U1452PCDD5707Interchangeable
interchangeable cross-reference
interchangeable
5119173Interchangeable
interchangeable cross-reference
interchangeable
520085Interchangeable
interchangeable cross-reference
interchangeable
5707-5Interchangeable
interchangeable cross-reference
interchangeable
471535Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 471535?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 471535?
471535 is a WASHER,KEY.
What parts can replace 471535?
There are 16 known substitutes for 471535: 5707, 14U1452PCDD5707, 5119173 and 13 more. Substitute compatibility should be verified for your specific system.
Is 471535 still available?
471535 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 471535

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026