10905471 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

10905471: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_length: 7.620 INCHES NOMINAL IN, undercut_width: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, first_end_style: CHAMFERED, effective_length: 7.280 INCHES MINIMUM AND 7.290 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-116-4065, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10905471

NSN: 5315-00-116-4065
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

diameter	0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
material	STEEL OVERALL
overall_length	7.620 INCHES NOMINAL IN
undercut_width	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
first_end_style	CHAMFERED
effective_length	7.280 INCHES MINIMUM AND 7.290 INCHES MAXIMUM IN
style_designator	GROOVE
surface_treatment	CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
undercut_diameter	0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_end_taper_angle	45.0 DEGREES NOMINAL
second_undercut_width	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NSN	5315-00-116-4065

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

•

DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.030 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
DIAMETER	0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
OVERALL LENGTH	7.620 INCHES NOMINAL IN
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

CS-2300-0001Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 10905471?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10905471?

10905471 is a PIN,GROOVED,HEADLESS.

What parts can replace 10905471?

There is 1 known substitute for 10905471: CS-2300-0001. Substitute compatibility should be verified for your specific system.

What is the NSN for 10905471?

10905471 is cataloged in the U.S. Government catalog under NSN 5315-00-116-4065. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10905471 — PIN,GROOVED,HEADLESS

Request a Quote — 10905471