Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, material: STEEL COMP 302 OVERALL, overall_length: 0.130 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-402-5204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10865-001
NSN:5340-00-402-5204 FSC:5340 CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
length
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
material
STEEL COMP 302 OVERALL
overall_length
0.130 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
0.750 INCHES NOMINAL IN
mounting_method
TERMINAL
terminal_length
0.900 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
first_leg_length
6.430 INCHES MINIMUM AND 6.440 INCHES MAXIMUM IN
overall_diameter
0.115 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
0.620 INCHES NOMINAL IN
NSN
5340-00-402-5204
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
•
SECOND LEG THICKNESS: 0.620 INCHES NOMINAL IN
•
SECOND LEG HOLE ARRANGEMENT STYLE: FOUR HOLES
•
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH: 2.214 INCHES MINIMUM AND 2.224 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.940 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.870 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.750 INCHES NOMINAL IN
•
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH: 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
SECOND LEG THICKNESS
0.620 INCHES NOMINAL IN
SECOND LEG HOLE ARRANGEMENT STYLE
FOUR HOLES
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
2.214 INCHES MINIMUM AND 2.224 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER
0.940 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.870 INCHES NOMINAL IN
FIRST LEG THICKNESS
0.750 INCHES NOMINAL IN
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH
0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10865-001?
10865-001 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 10865-001?
There are 6 known substitutes for 10865-001: 28473-41007, 50-464-020, 0832S and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10865-001?
10865-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-402-5204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.