PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11108-001
11108-001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, material: STEEL COMP 302 OVERALL, material_document_and_classification: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-894-0227, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11108-001
NSN: 5310-00-894-0227
FSC: 5310
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
materialSTEEL COMP 302 OVERALL
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-894-0227
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11108-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
•
PLATE THICKNESS: 0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
MOUNTING PROVISION LOCATION: OPPOSITE NUT PROJECTION SIDE
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
WELDING PROJECTION QUANTITY: 2
•
NUT LENGTH: 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
PLATE THICKNESS0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
MOUNTING PROVISION LOCATIONOPPOSITE NUT PROJECTION SIDE
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
WELDING PROJECTION QUANTITY2
NUT LENGTH0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3B
PRECIOUS MATERIALSILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10664352Interchangeable
interchangeable cross-reference
interchangeable
101833Interchangeable
interchangeable cross-reference
interchangeable
C060C40Interchangeable
interchangeable cross-reference
interchangeable
M137R40Interchangeable
interchangeable cross-reference
interchangeable
19534Interchangeable
interchangeable cross-reference
interchangeable
989114-26CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11108-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11108-001?
11108-001 is a NUT,SELF-LOCKING,PLATE.
What parts can replace 11108-001?
There are 17 known substitutes for 11108-001: 10664352, 101833, C060C40 and 14 more. Substitute compatibility should be verified for your specific system.
Is 11108-001 still available?
11108-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11108-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026