PartsTable
Technical Data Sheet
108384 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Charger with selectable output voltage (3 - 4.5 - 5 - 6 - 7.5 - 9 - 12V) and exchangeable DC plugs for numerous tablet PCs (e.g. Motorola Xoom Tablet);<br>- Mains supply of 110 V – 240 V suitable for use worldwide in conjunction with country-specific adapter;<br>- Extra low energy consumption;<br>- Compact, state-of-the-art power supply unit;<br>- Very efficient;<br>- Low energy consumption in standby mode;<br>- Can be used anywhere around the world;<br>- Short circuit protection;<br>- Automatic protection against overload and overheating;<br>- Switchable polarity;<br>- Red LED for checking status;<br>- TÜV/GS approved.<br><br><b>6 DC adapter plugs included:</b><br>- 5 mm x 2.1 mm;<br>- 5.5 mm x 2.5 mm;<br>- 3.5 mm x 1.35 mm;<br>- 4.0 mm x 1.7 mm;<br>- 2.35 mm x 0.75 mm;<br>- 3.5 mm x 1.1 mm. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-734-3453, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
108384
NSN: 5340-00-734-3453
FSC: 5340
CAGE: 3M833 — TRANSUPPORT INC DBA TRANSUPPORT INC (USA)
SPECIFICATIONS
materialSTEEL
attachment_to_item_supported_methodHOLDS ITEM BY FRICTION
supporting_object/surface_attachment_methodFLANGE MTG
NSN5340-00-734-3453
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 108384 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPORTING OBJECT/SURFACE ATTACHMENT METHOD: FLANGE MTG
ATTACHMENT TO ITEM SUPPORTED METHOD: HOLDS ITEM BY FRICTION
MATERIAL: STEEL
SPECIAL MARKINGS: N/A
TECHNICAL CHARACTERISTICS (FLIS)
SUPPORTING OBJECT/SURFACE ATTACHMENT METHODFLANGE MTG
ATTACHMENT TO ITEM SUPPORTED METHODHOLDS ITEM BY FRICTION
MATERIALSTEEL
SPECIAL MARKINGSN/A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
15434Upgraded Successor
successor cross-reference
successor
107460Interchangeable
interchangeable cross-reference
interchangeable
DS-930651Interchangeable
interchangeable cross-reference
interchangeable
5303-812Interchangeable
interchangeable cross-reference
interchangeable
B26-4Interchangeable
interchangeable cross-reference
interchangeable
55525Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 108384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108384?
108384 is a HOLDER,SPRING manufactured by Hama.
What parts can replace 108384?
There are 12 known substitutes for 108384: 15434, 107460, DS-930651 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 108384?
108384 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-734-3453. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108384