PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS-930651
DS-930651 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL OVERALL, peripheral_diameter: 0.900 INCHES NOMINAL IN, center_hole_diameter: 0.638 INCHES NOMINAL IN, fsc_application_data: PUMP,HYDRAULIC,ACFT, cross-sectional_height: 0.219 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-332-6798, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS-930651
NSN: 5330-00-332-6798
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL OVERALL
peripheral_diameter0.900 INCHES NOMINAL IN
center_hole_diameter0.638 INCHES NOMINAL IN
fsc_application_dataPUMP,HYDRAULIC,ACFT
cross-sectional_height0.219 INCHES NOMINAL IN
cross-sectional_thickness0.043 INCHES NOMINAL IN
NSN5330-00-332-6798
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS-930651 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.900 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.043 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.219 INCHES NOMINAL IN
•
ANGLE: 45.0 DEGREES NOMINAL
•
CENTER HOLE DIAMETER: 0.638 INCHES NOMINAL IN
•
FSC APPLICATION DATA: PUMP,HYDRAULIC,ACFT
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.900 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.043 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CROSS-SECTIONAL HEIGHT0.219 INCHES NOMINAL IN
ANGLE45.0 DEGREES NOMINAL
CENTER HOLE DIAMETER0.638 INCHES NOMINAL IN
FSC APPLICATION DATAPUMP,HYDRAULIC,ACFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
107460Interchangeable
interchangeable cross-reference
interchangeable
15434Interchangeable
interchangeable cross-reference
interchangeable
5303-812Interchangeable
interchangeable cross-reference
interchangeable
B26-4Interchangeable
interchangeable cross-reference
interchangeable
55525Interchangeable
interchangeable cross-reference
interchangeable
2984-35Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS-930651?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS-930651?
DS-930651 is a RETAINER,PACKING.
What parts can replace DS-930651?
There are 12 known substitutes for DS-930651: 107460, 15434, 5303-812 and 9 more. Substitute compatibility should be verified for your specific system.
Is DS-930651 still available?
DS-930651 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS-930651

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026