PartsTable
Technical Data Sheet
108206 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- High-quality sleeve for safe storage of the Motorola Xoom, protects against dirt and scratches<br>- Soft inside lining that protects the sensitive surface of the case<br>- Made of genuine leather. Key specifications include material: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, housing_bore_diameter: 2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
108206
NSN: 5330-00-050-0037
FSC: 5330
CAGE: 76292 — MICHIGAN LEATHER PRODUCTS CO (USA)
SPECIFICATIONS
materialLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
housing_bore_diameter2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1204 FEET PER MINUTE FT
NSN5330-00-050-0037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 108206 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
SEAL WIDTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1204 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
SEAL WIDTH0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1204 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
060444AInterchangeable
interchangeable cross-reference
interchangeable
60392Interchangeable
interchangeable cross-reference
interchangeable
060392Interchangeable
interchangeable cross-reference
interchangeable
50244Interchangeable
interchangeable cross-reference
interchangeable
494LXInterchangeable
interchangeable cross-reference
interchangeable
SC-B-69340Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 108206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 108206?
108206 is a PLACARD ASSY PANEL, manufactured by Hama.
What parts can replace 108206?
There are 24 known substitutes for 108206: 060444A, 60392, 060392 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 108206?
108206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 108206