PartsTable
Technical Data Sheet
50244 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

If your computer has a motherboard that supports USB, but does not have USB connectors at the back, this is the solution. <br><br>The back panel connects to the motherboard's USB controller and is easily and simply attached to the back of the computer to give you two USB ports. Remember to enable USB in the computer's BIOS – if necessary, see your computer's user guide for instructions.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0037, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
50244
NSN: 5330-00-050-0037
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
width1.075 INCHES NOMINAL IN
materialSTEEL
case_styleSQUARE
seal_width0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
overall_height0.637 INCHES NOMINAL IN
overall_length2.906 INCHES NOMINAL IN
bolt_hole_quantity4
bore_inside_diameter0.156 INCHES NOMINAL IN
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
housing_bore_diameter2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
sealing_element_styleANGULAR
end_item_identificationMODEL 200 SEWAGE PUMP SIZE 6X6X17
NSN5330-00-050-0037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50244 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
SEAL WIDTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1204 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.061 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
SEAL WIDTH0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1204 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
060444AInterchangeable
interchangeable cross-reference
interchangeable
60392Interchangeable
interchangeable cross-reference
interchangeable
060392Interchangeable
interchangeable cross-reference
interchangeable
50244Interchangeable
interchangeable cross-reference
interchangeable
494LXInterchangeable
interchangeable cross-reference
interchangeable
SC-B-69340Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50244?
50244 is a TRANSFORMER,POWER AUTOTRANSFORME manufactured by Sandberg.
What parts can replace 50244?
There are 24 known substitutes for 50244: 060444A, 60392, 060392 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50244?
50244 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50244