PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10636-C-18
10636-C-18 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 2.500 INCHES NOMINAL IN, first_leg_length: 5.225 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-348-5608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10636-C-18
NSN: 5340-00-348-5608
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width2.500 INCHES NOMINAL IN
first_leg_length5.225 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleCORNER RADIUS
second_leg_width2.500 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
second_leg_length5.590 INCHES NOMINAL IN
first_leg_thickness0.250 INCHES NOMINAL IN
center_section_width2.500 INCHES NOMINAL IN
NSN5340-00-348-5608
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10636-C-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: DOUBLE ANGLE
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 5.590 INCHES NOMINAL IN
•
CENTER SECTION THICKNESS: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
FIRST LEG LENGTH: 5.225 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG ANGLE90.0 DEGREES NOMINAL
STYLE DESIGNATORDOUBLE ANGLE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH1.250 INCHES NOMINAL IN
SECOND LEG LENGTH5.590 INCHES NOMINAL IN
CENTER SECTION THICKNESS0.250 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
FIRST LEG LENGTH5.225 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG WIDTH2.500 INCHES NOMINAL IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
240AUpgraded Successor
successor cross-reference
successor
DD927S4101-1185143PC18Upgraded Successor
successor cross-reference
successor
G10125PC38Upgraded Successor
successor cross-reference
successor
601352Interchangeable
interchangeable cross-reference
interchangeable
ST10016Interchangeable
interchangeable cross-reference
interchangeable
77506Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10636-C-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10636-C-18?
10636-C-18 is a BRACKET,DOUBLE ANGLE.
What parts can replace 10636-C-18?
There are 17 known substitutes for 10636-C-18: 240A, DD927S4101-1185143PC18, G10125PC38 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10636-C-18?
10636-C-18 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-348-5608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10636-C-18

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026