PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10511275
10511275 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, outside_diameter: 0.718 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-8607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10511275
NSN: 5330-00-010-8607
FSC: 5330
CAGE: 56161 — GENERAL DYNAMICS LAND SYSTEMS CANADACORP (CAN)
SPECIFICATIONS
materialCORK OVERALL
outside_diameter0.718 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.500 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-010-8607
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10511275 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.718 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: CORK OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.718 INCHES NOMINAL IN
APERTURE DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALCORK OVERALL
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
775-6Interchangeable
interchangeable cross-reference
interchangeable
P1001-6Interchangeable
interchangeable cross-reference
interchangeable
EP 161832Interchangeable
interchangeable cross-reference
interchangeable
B1618-16Interchangeable
interchangeable cross-reference
interchangeable
AM3031003Interchangeable
interchangeable cross-reference
interchangeable
920805Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10511275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10511275?
10511275 is a GASKET.
What parts can replace 10511275?
There are 8 known substitutes for 10511275: 775-6, P1001-6, EP 161832 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10511275?
10511275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-8607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10511275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026